Specification:
| Model No. | JAGUAR N300 |
| Control Method | Button+PLC(Optional: Touch Screen or PC) |
| Number of Pre-heaters | 3 |
| Pre-heater Passage | 1450mm |
| Preheating Time | About 10-15mins for Setting 150ºC |
| Preheat Style | Hot Air |
| Preheat Consumption | 220V 6KW |
| Solder Application | Lead-free / Sn-Pb |
| Solder Pot Capacity | 280kgs |
| Solder Pot Temperature | 300ºC |
| Solder Pot Consumption | 380V 9KW |
| Solder Temp. Control Method | PID&SSR |
| Wave Motor Power | 250Wx2pcs 220V |
| Solder Melting | About 120mins for Setting 250ºC |
| PCB Width | 50-300mm |
| Conveyor Speed | 0-1800mm/min |
| Conveyor Direction | L→R (R→L optional) |
| Solder Angel | 4-7 º |
| Flux Pressure/Capacity | 3-5 Bar |
| Flux Capacity | 5.2L |
| Weight | 1200KG |
| Total/Steady Sonsumption | 26KW/6-9KW |
| Air Supply | 0.5MPa |
| Body Size | 2800(L)*1250(W)*1700(H) |
| Outside Dimension | 3600(L)*1250(W)*1700(H) |
Introduction:
1. Energy-saving, lead-free application, meet with environmental protection requirement and user friendly designed
- Automatic power system, inverter control, automatic board in-load feature.
- Flux sprayer using transverse Japanese spray nozzle and driving by stepper motor, spray range is selective, PLC controlled, accurate and reliable.
- Flux recovery container drawer design, easy to clean.
- Conveyor equiped 3 width adjustable screws, the conveyor transmission is more stable, no PCB falling risk.
- 6. Titanium solder fingers, high strengthened double v-groove with tin resistant
- PID close loop controlled hot air pre-heaters, preheating system uses threeindependent temperature control so as to ensure the excellent heat preservation, temperature uniformity, temperature accuracy in ±2ºC.
- 8.Pre-heat passage modular design, environmental protection and safety, convenient for cleanup.
- 9. Solder motor adopts imported high frequency conversion motor with independent control, stable performance.
- Solder pot’s inpeller material is cast iron, never corrode, solder pot with oxidation jacket, low solder dross
- 11. Timer startup feature for solder pot, solder melted in within 90 minutes.
- Automatic finger cleaner equipped.
- 13. With black box memory function, the machine can always store the SPC data, improve work efficiency.
- 14. Intelligent monitoring and alarm system ensure the stable performance and operators’ safety.
English 
Chinese